What Users Have To Say About EPS
|
"Since stocking EPS Unlimited, our customers comment on how well the clean, oil-free surface laser cuts, how it lets them increase their laser speed, and how the dry surface helps throughout their other fabricating processes. Nothing else we've ever supplied elicits the positive feedback EPS Unlimited does."
Terry Orsbun, |
|
"We're launching an exciting new method of how we process our mild and stainless steel material to remove mill scale and rust. This innovative technology, "Eco Pickled Surface" or EPS, creates an ideal proļ¬le for paint adhesion especially on stainless steel. In addition, it preps the steel better than any acid chemicals currently available for wash systems. " Central Moloney, Inc.
|
|
|
"What attracted us to EPS was the dry surface. We bell annealed EPS coils and they left no oil in the annealing bell or vent lines. Also, EPS' clean, consistent surface masks the silicon streaks that acid pickling highlights. We've been very happy annealing and cold reducing EPS."
Robert Costello, |
|
" Eco Pickled steel eliminates fumes from welding and lasering process making it safer for our workers and the environment. Not only is it safer during our thermal processes, it offers a cleaner surface for paint adhesion. This minimizes the use of degreasing agents used in paint preparation, which further impacts the environment in a positive direction. " Yarder Manufacturing Company
|
|
|
"This combination of EPS Processing and Stretcher Leveling creates an unrivaled value among prime steel products. A demanding customer of ours raves about EPS Unlimited. The stress-relieved sheets laser great and their surface quality gives a consistently high-quality paint finish." The Steel Works, LLC.
|
|
"I'm very impressed with EPS. We proved it is rust-resistant and obtained excellent salt spray test results. It even removes silicon streaks. And with no oil, there's less smoke in our thermal processing and our paint pretreatment system stays much cleaner " DeJong Manufacturing Company
|
|
|
"During the hot immersion galvanizing process for the EPS coil, the material did not present any issues and was processed at 25 tons/hour. The spangle obtained in this steel was more uniform, and compared to acid pickled coils of the same thickness that preceded it, the EPS coil's spangle was smaller and more homogeneous." Acerias De Columbia S.A.
|
Facebook Twitter New Post